How To Maintain the Straight Wire Drawing Machine?

The straight wire drawing machine is one of the more common metal wire processing equipment. The straight wire drawing machine can process high, medium and low carbon steel wire, stainless steel wire, copper wire, alloy copper wire, aluminum alloy wire, etc.

Operational requirements of straight wire drawing machine

  • Before processing with a wire drawing machine, you must first understand and be familiar with the processing drawings and some related technical data, so as to avoid waste or scrap in the processing process.
  • The wire drawing direction and wire drawing abrasive belt should be correctly determined and selected, and there can be no errors.
  • The operator should wear gloves to work and must provide some necessary protection to the surface of the workpiece.
  • If the surface of the workpiece is not clean, wire drawing is strictly prohibited.
  • The finished product after drawing should be protected and handled with care.

Maintenance of straight wire drawing machine

Daily maintenance

  • The equipment should be cleaned after each use and some necessary inspections should be carried out.
  • Check and adjust the abrasive belt, and perform daily lubrication work on the equipment.

Weekly maintenance

In addition to daily maintenance, check the conveyor belt to see if it is properly tensioned.

At the same time, the wire drawing die is a consumable part of the wire drawing machine, so remember not to neglect the maintenance of the wire drawing machine die.

Usually, the wire drawing template is always used for a long time during the operation of the wire drawing machine, because the die wall is always subject to strong erosion and friction from different wires during operation, which usually causes some wear and tear, and generally forms a small dent at the entrance of the material. . If the ring groove of the drawing die appears, it will accelerate the wear of the template. If it is not repaired in time, the loss will continue to increase, and the difficulty will be greatly increased when repairing. If it is serious, cracks will appear in the deeper part of the ring groove, which will make the mold Completely shattered and scrapped.

To avoid the above situation, the operator must customize a set of norms and standards for the daily maintenance of the wire drawing machine based on the detailed experience in the daily work. During the operation, once the template is slightly worn, it must be polished in time, so that the template can be restored to the original polished state in a short time, and the hole size will not change much.

If you want to buy carbide drawing dies or PCD dies, just contact us.

Write a Comment