Carbide Inserts News
Home › Carbide Inserts News
Home › Carbide Inserts News
Today’s nails are typically made of steel, often dipped or coated to prevent corrosion in harsh conditions or to improve adhesion. Ordinary nails for wood are usually of a soft, low-carbon or “mild” steel (about 0.1% carbon, the rest iron and perhaps a trace of silicon or manganes...
Read MoreABSTRACT Ti (C, N) -based cermets with different Nbc contents (0% 、3% 、6% 、9% 、12% ) were prepared by powder metallurgy method, and then the TiAlCrSiN coating was coated on the surface of the prepared cermet matrix by physical vapor deposition (PVD). The microstructure of the cermets coated with ...
Read MoreMetal processing is inseparable from the inserts. A high-quality insert must have these characteristics: High wear resistance Long tool service life High metal removal rate High reliability Even under severe conditions (such as complex cutting and deep cavity), dry cutting or wet cutting m...
Read MoreCorner radius end mill The corner radius end mill is a tool whose arc part length is greater than 1/4 circle. It has following characteristics. Fully ground spiral groove: exquisite spiral groove, large chip removal space, avoid knife sticking, it greatly improve production efficiency. Easy to ...
Read MoreIn recent years, with rapid development of national economic strength, the domestic machine tool has become in full swing. As a member of the CNC tools, Our is working hard to make a meager contribution to the CNC machining industry. All we know finding a useful and efficient end mill is a dream f...
Read MoreBoth production and sales are booming, the prosperity of CNC machine industry continues to rise It is reported that the State-owned Assets Supervision and Administration Commission of the State Council (SASAC) recently held an enlarged meeting to study and deploy key tasks in the next phase...
Read MoreImportance of accuracy of the machine tool The accuracy of the machine tool determines the degree of refinement of the processed product to a large extent. If we use the traditional machine tool and the CNC machine tool to operate at the same level of technology, the accuracy of the CNC machine to...
Read MoreThe installation of the tool has a great relationship with the use effect of the tool. In addition to the installation according to the instructions of the machine supplier, if the machine is 100% accurate, the tool is also 100% accurate.Why don’t you come with me to learn how to install and ...
Read MoreMilling is essentially a discontinuous process. This causes the temperature at the cutting edge to fluctuate constantly between high temperature (about 1000 ℃) and low temperature. So use the correct way is very important in CNC machine. The Influence of Cutting Fluid As the cutting edge&nbs...
Read MoreHigh-speed steel (HSS) can withstand higher temperatures without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high-speed steel. At room temperature, in their generally recommended heat treatment, HSS grades generally display high hardne...
Read More