Top 3 Main Tools for Wire Nail Making Machine
Home › Product News › Top 3 Main Tools for Wire Nail Making Machine
Top 3 Main Tools for Wire Nail Making Machine
Nails, in engineering, carpentry, and construction, refer to fasteners made of pointed hard metals used to fix wood, leather, boards, etc. Common nail materials include steel, copper, and iron.
wikipediaNails have a wide range of uses and are in great demand in our daily lives. Our nail making mainly includes 5 processes, laying（wire rod）, descaling, wire drawing, nail making, polishing. Nail dies, nail s and punches are main tools for wire nail making machine. Our brazed nail tool, the grade for carbide is YG20C, the steel is 45#.
Carbide Brazed Gripper Nail Dies
After the coil wire is sent into the nail making machine, it will be clamped by a pair of nail gripper dies. These dies hold the wire tightly in place, while the free end wire is struck with a mechanical hammer, which causes the wire to deform within the cavity-forming head of the nail.
machine, it will be clamped by a pair of nail gripper dies. These dies hold the wire tightly in place, while the free end wire is struck with a mechanical hammer, which causes the wire to deform within the cavity-forming head of the nail.
machine, it will be clamped by a pair of nail gripper dies. These dies hold the wire tightly in place, while the free end wire is struck with a mechanical hammer, which causes the wire to deform within the cavity-forming head of the nail.
Carbide Brazed Nail Cutter
With the wire still clamped in dies, the nail cutters hit the opposite end of nail, forming point and later cutting the nail from the residual wire-coil. Nail cutters with different angles will cut off different point.
Carbide Brazed Nail Punch
The semi-finished materials of the nails are sent to the nail making machine, and the head of the nail is stamped out with Nail punches, and various logos can be made.
Common problems and reasons
1. The punch carbide is sunken, the main reason is: long time use, worn with holes, nail hardness is too high.
Solution: If it is aimed at high carbon steel, can quench the shank to increase the hardness.
2. The nail dies cannot clamp the wire, the main reason: the wire is too thin, if our nail dies standard is 4.00mm, the actual wire size of our nail dies is only 3.8mm.
Solution: Confirm the nail size to avoid later problems
3. Nail cutter cuts uninterrupted wire or the alloy collides, the main reason is that the distance between the dies should be adjusted.
4. The nail cutter carbide inserts is cracked, the main reason is that the nail cutter hits the welding point of the circle.
Market trend
Round gripper dies with carbide inserts are trend spare parts for nail making machine. If you have any interest, pls fell free to contact us.
Write a Comment