1).Japan Tungaloy brand;
2).Tungaloy carbide inserts are for general purpose / multi-purpose cutting;
3).Improved chipping resistance;
4).Stronger coating adhesion;
5).Improved wear resistance;
6).Stability and security in productive turning;
7).Long tool life in continous and interrupted cutting;
8).Various types and grades for choices.
1).Famous Brand: Tungaloy;
2).Place of Origin: Japan;
3).Material: Tungsten Carbide/Hard Alloy/Cermet;
4).Delivery: Short;
5).MOQ: 10 pieces (1 box);
6).Package: Original plastic box.
| Tungaloy grades | Application |
| T9105/T9115/T9125/T9135 | For steels |
| T6120/T6130/T6020/T6030 | For stainless steels |
| T5105/T5115/T5125 | For grey and ductile cast irons |
| T313V | For threading |
| T3130 | For steels, stainless steels |
| T1115 | For grey and ductile cast irons |
| AH120 | General grade |
| AH130 | For steels & stainless steels / very tough grade |
| AH330 | For steels and stainless steels |
| AH3035 | For steels |
| AH710 | For grooving |
| AH725 | General grade For grooving |
| AH730 | For steels |
| AH740 | For steels |
| AH9030 | For steels |
| SH730 | For steels, stainless steels and superalloys (thin PVD) |
| GH730 | For grooving and parting off at low speed |
| GH330 | For steels and stainless steels |
| AH140 | For stainless steels |
| AH630 | For stainless steels (AH600 series) |
| AH645 | For stainless steels (AH600 series) |
| AH725 | General grade |
| AH110 | For cast irons and heat resisting alloys |
| GH110 | For cast irons and non-ferrous metals |
| DS1100 | For aluminium alloys |
| DS1200 | For aluminium alloys |
| AH905 | For superalloys |
| J740 | For small lathes |
| GT730 | For steels and cast iron |
| GT530 | For steels |
| AT530 | For steels |
| GT520 | For steel and cast iron machining at high speed |
| J530 | For small lathes |
| NS730 | For steels and cast iron |
| NS740 | For steels |
| NS530 | For steels and cast iron |
| BXC90 (BX90S) | Coated grade for high speed continuous or interrupted machining |
| BX850 | PCBN grade for machining cast irons |
| BX870 | For machining cast iron Cylinder liners |
| BX910 | CBN grade for centrifugally cast iron machining |
| BX930 | PCBN grade for machining grey and ductile cast irons |
| BX950 | High CBN content grade for high speed machining |
| BX480 | PCBN grade for machining ferrous sintered metals and hard rolls |
| BX470 | Super fine grain PCBN grade for machining ferrous sintered metals |
| BXM10 | Coated grade for high-speed continuous and light interrupted machining |
| BXM20 | Coated grade for continuous and interrupted machining and the removal of the carburized layer |
| BXC50 | Coated grade for continuous to interrupted machining |
| BX310 | High speed, continuous machining grade |
| BX330 | Super fine grained grade for superior surface finish |
| BX360 | General purpose grade for continuous to ordinarily interrupted machining |
| BX380 | Tough grade for heavily interrupted machining |
| BX530 | Ultra fine grain PCBN grade for superior surface finish |
| DX110 | Super fine grain T-DIA grade for superior surface finishi |
| DX120 | For precision machining of non-ferrous metals and nonmetals |
| DX140 | Used for machining of non-ferrous metals and nonmetals. |
| DX160 | for machining half sintered ceramics and cemented carbides, stones and non-ferrous metals |
| DX180 | Suitable for turning half sintered ceramics and cemented carbides. |
| FX105 | used for high speed cutting of cast irons |
| CX710 | used for high speed cutting of cast irons. |
| LX21 | for continuous cutting of cast irons. |
| LX11 | used for continuous turning of ferrous hard materials |
Welcome to our Tungaloy Inserts hub, where precision meets performance in cutting-edge tooling solutions. With a legacy of innovation spanning decades, Tungaloy remains at the forefront of the industry, delivering superior quality inserts that redefine machining standards. From turning and milling to drilling and threading, our inserts are meticulously crafted to optimize efficiency, durability, and accuracy in every application. Explore our comprehensive range of inserts engineered to excel in diverse materials and machining conditions, empowering businesses worldwide to achieve unparalleled productivity and excellence.
In metal cutting, there are different workpiece materials, and different materials have different cutting formation and removal characteristics. How do we understand the characteristics of different ...
Read MoreWhat is cold heading? We often call cold heading is the use of the metal’s own plasticity, pressure, or cold drawing process, so that the metal can achieve the purpose of solid deformation. On...
Read MoreThe basic edge shapes of end mills (helix groove shapes) are straight and helix. The helix angle can be divided into 30 degrees, 45 degrees, 50 degrees, and so on. Compared with a straight edge, heli...
Read More
All Types of All Inserts Brands to Support Your Project and Business
